1.) Small masses of the sprags
Small masses allow high indexing frequencies (up to 60 Hz) due to low inertia.
2.) Small sprags save space
Based on the very small head surface of the sprags we may install a very large number of sprags on a given space resulting in a very high torque capacity.
3.) Optimum design of the clamping curve. The special design and the very high production accuracy are the warranty for maximum indexing accuracy and reliability.
Insert elements and roller bearings
Ball bearings clutches
for shaft sizes of 2 to 80 mm (series 400) 38 to 123 mm (series 8000)
Complete units made of inner and outer ring, incorporated ball bearing and RS seals with the dimensions of regular ball bearings as per DIN 625 series 62... .
Complete units
Backstops
Packages consisting of inner and outer rings, insert clutches and incorporated ball and roller bearings. Double seal and pregreasing optional.
Complete units with momentum lever.
GMN-Roller ramp clutches
Special sizes
Please note also our supplementary and interchangeable product line.
On request we produce customer oriented specials in many variations, from changing the mating diameters or changing the torque rate to real new units based on the users requirements.
Please show us your clutch problem - we will offer the best solution, technically and commercially.
12633 Shiloh Church Rd - Houston, TX 77066 USA Phone: (800) 323-5725, (281) 858-7000 Fax: (281) 858-7277
