GMN Labyrinth Seals are non separable units of a steel inner ring and an aluminum outer ring ready for installation. Due to the very special production process both rings carry absolute identical profiles which result in a perfect gap between both rings.
The dimensions of the GMN Non-Contact Seals are equal or close to the dimensions of anti friction bearings and regular contact seals.
Type L Labyrinth Seal
Diameter range (shaft) d = 15 mm to 210 mm
Width - depending on size 10 / 14 / 15 / 20 / 22 mm
for fine or coarse granular contamination
for heavy splashing liquids
no speed limit
maximum temperature 170° C/340° F
Type M Labyrinth Seal
The "M" Type labyrinth seals
incorporate milled grooves at the outer ring to allow heavy splashing liquid particles to be
centrifuged out into an annular groove in the customer's part which is connected to a drain
hole. These penetrating liquids can then be led back to the desired location.
Diameter range (shaft) d = 15 mm to 210 mm
Width - depending on size 10 / 14 / 15 / 20 / 22 mm
for fine and coarse granular contamination
for heavy splashing liquids
no speed limit
maximum temperature 170° C/340° F
Specials - Customer oriented seals
On request we will be pleased to suggest and produce special labyrinth seals for special applications. If necessary we will produce special sizes, seals made of special material (e.g. rust proof inner rings), or seals with increased end play. Please contact us for more information.
12633 Shiloh Church Rd - Houston, TX 77066 USA Phone: (800) 323-5725, (281) 858-7000 Fax: (281) 858-7277
The "M" Type labyrinth seals
incorporate milled grooves at the outer ring to allow heavy splashing liquid particles to be
centrifuged out into an annular groove in the customer's part which is connected to a drain
hole. These penetrating liquids can then be led back to the desired location.
