VGL Series Roller Ramp Clutch

Type Series VGL Roller Ramp Clutch

Basic clutch mostly to be used outside housings, i.e. with sprockets.

  • Shaft diameters 12 ­ 80 mm as standards
  • With ball bearing series 16000
  • Basic element for combinations with standard covers and flanges or customer oriented specials
  • Rust protected only

Specials

For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).

GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.

Part Number Shaft Diameter
d [mm]
Outer Diameter
D [mm]
Width
b [mm]
Torque
M [Nm]
VGL 12 / VGLP 12 F7D7 12 N/A 42 37
VGL 15 / VGLP 15 F7D7 15 N/A 52 58
VGL 20 / VGLP 20 F7D7 20 N/A 57 140
VGL 25 / VGLP 25 F7D7 25 N/A 60 175
VGL 30 / VGLP 30 F7D7 30 N/A 68 325
VGL 35 / VGLP 35 F7D7 35 N/A 74 400
VGL 40 / VGLP 40 F7D7 40 N/A 86 600
VGL 45 / VGLP 45 F7D7 45 N/A 86 840
VGL 50 / VGLP 50 F7D7 50 N/A 94 1500
VGL 55 / VGLP 55 F7D7 55 N/A 104 1560
VGL 60 / VGLP 60 F7D7 60 N/A 114 2350
VGL 70 / VGLP 70 F7D7 70 N/A 134 3400
VGL 80 / VGLP 80 F7D7 80 N/A 144 4900

Click here or call 1.800.323.5725 to Request a quote

Back to Top