VS Series Roller Ramp Clutch

Type Series VS Roller Ramp Clutch

  • Connecting dimensions like ball bearings series 6200 (exception: VS 8)
  • shaft diameters 8 - 80 mm as standards
  • rust protected only

Specials

For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).

GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.

Part Number Shaft Diameter
d [mm]
Outer Diameter
D [mm]
Width
b [mm]
Torque
M [Nm]
VS 8 8 24 8 2.5
VS 10 10 30 9 5.8
VS 12 12 32 10 8.7
VS 15 15 35 11 9.7
VS 20 20 47 14 31
VS 25 25 52 15 40
VS 30 30 62 16 72
VS 35 35 72 17 107
VS 40 40 80 18 137
VS 45 45 85 19 163
VS 50 50 90 20 174
VS 60 60 110 22 330

Click here or call 1.800.323.5725 to Request a quote

Back to Top