Search Clear Form

Search Clear Form

Search Clear Form

Search Clear Form

Overview

A food processing equipment manufacturer was developing a tool to cut produce at high RPMs but struggled to design a system whose service life lasted longer than a month. The machine they were developing used a spindle rotating at 8,000 RPM to cut produce flowing through the shaft.

The system needed to be large enough to allow the produce to flow through the shaft, able to handle axial loads from the produce hitting the cutting blade, and able to withstand high temperatures and RPMs.

Our engineering team set out to find the best bearing solution for their systems, ultimately leading to a longer application life and improved efficiency.

A line of industrial food cutting systems

How GMN Helped

Since the system required the produce to pass through the center of the cutting tool fully submerged in water, the OEM first approached GMN for help with sealing solutions; they were having trouble getting the system to handle high RPMs while simultaneously preventing leaking.

In addition, they were also facing critical bearing challenges when it came to sourcing bearings that could live up to the speed requirement. To support the system’s large-scale design where produce flowed directly through the shaft at high temperatures, GMN engineers recommended super precision bearings capable of enduring both high RPMs and extreme heat from the heated water flowing through the shaft.  

The use of the bearings in combination with a labyrinth seal resulted in a solution that would successfully keep liquids away from the bearing system due to the complex maze-like pattern of the seal that expels liquids/contaminates via centrifugal forces.

CF labyrinth seal design

For the bearing design, GMN offered engineering support to optimize a configuration that could handle the large temperature fluctuations by recommending a triplex back-to-back configuration with a pair of bearings in tandem in the front to handle the large axial loads. We also recommended the rear opposing bearing be spring-preloaded to help with the thermal conditions.

TBT arrangement diagram

Our team of engineers ran bearing performance calculations to determine the optimal bearing size and contact angle that could handle the RPMs and be large enough to allow the produce to flow through shaft. If you’re unsure how to choose the correct bearing for your application, contact our engineers and we will find the best size and type of bearing for you.

Ultimately, S 6018 E TA P4+ UL bearings were recommended to give the best axial load capacity and room with the 90mm ID to allow the produce to flow through the bore. For lubrication, a food-compatible grease was selected that could handle temperatures over 100°C with minimal life reduction.

CF 6018 S10 labyrinth seals were also recommended as a secondary layer of defense to protect the bearings from the processing liquid. Our engineering team additionally provided further technical support to optimize the system to minimize the liquid from reaching the seals.

The Results

With GMN’s engineering support, the new spindle design exceeded the end user’s expectations. All system objectives were met and GMN bearings and seals performed so flawlessly that the system’s service life is now being measured in years instead of months.

The new design worked because GMN was consulted from the beginning and a collaborative approach was taken between both GMN’s and the OEM’s engineers. Bearing performance software enabled GMN engineers to iterate through numerous design options to select the optimal bearing size and contact angle. Additionally, GMN’s high-quality, reliable bearings ensured that the actual system performed even better than the design specifications.

Talk to a GMN Engineer

If you’re in need of design support for your application, our team of in-house engineers, certified bearing specialists, and technical experts are here to help. With decades of experience under our belts partnering with OEMs, we’re no strangers to common approaches and market needs.

Contact us for your next project to learn how we can help with design engineering support.

Desktop Tablet Mobile