Ball Bearing, Angular Contact HY KH 6014 E TA
| Part Number | HY KH 6014 E TA |
|---|
| Bearing Size | 6014 |
|---|
Bearing Dimensions
| Bore Diameter | d [mm] | 70 |
|---|
| Outer Diameter | D [mm] | 110 |
|---|
| Single Bearing Width | B [mm] | 20 |
|---|
| Pitch Circle Diameter | dm [mm] | 90.0 |
|---|
| Ball Diameter | Dw [mm] | 9.53 |
|---|
| OD Inner Ring | d1 [mm] | 82.6 |
|---|
| OD Inner Ring - Open Side | d2 [mm] | 81.1 |
|---|
| ID Outer Ring | D1 [mm] | 96.7 |
|---|
| ID Outer Ring - Open Side | D2 [mm] | 100.8 |
|---|
| Chamfer | r1,2 [mm] | 1.1 |
|---|
| Chamfer - Open Side | r3,4 [mm] | 1.0 |
|---|
Bearing Load Ratings
| Dynamic Radial Load Rating | C [N] | 22700 |
|---|
| Static Radial Load Rating - Steel Balls | C0 [N] | 16400 |
|---|
| Static Radial Load Rating - Si3N4 Balls | C0 HY [N] | 11500 |
|---|
Bearing RPM Ratings
| Speed Value - Oil Lubrication | noil [1/min] | 26875 |
|---|
| Speed Value - Grease Lubrication | ngrease [1/min] | 20000 |
|---|
| Bearing Series | KH |
|---|
| Hybrid (Si3N4 Balls) | Yes |
|---|
Geometrical Data
| Number of Balls | Z [Qty] | 24 |
|---|
| Contact Angle | α0 [°] | 25 |
|---|
| Bearing Weight | m [kg] | 0.593 |
|---|
Mating Part Dimensions
| Abutment Diameter Inner Ring | da,b min [mm] | 77.0 |
|---|
| Abutment Diameter Outer Ring | Da,b max [mm] | 102.0 |
|---|
| Chamfer Associated Component | ra max [mm] | 1.1 |
|---|
| Chamfer Associated Component - Open Side | rb max [mm] | 0.60 |
|---|
Bearing Preload Data
| Light Pre-Load | Fv [N] | 190 |
|---|
| Light Axial Rigidity | Cax [N/µm] | 143 |
|---|
| Medium Pre-Load | Fv [N] | 570 |
|---|
| Medium Axial Rigidity | Cax [N/µm] | 211 |
|---|
| Heavy Pre-Load | Fv [N] | 1150 |
|---|
| Heavy Axial Rigidity | Cax [N/µm] | 274 |
|---|
| Minimum Spring Pre-Load | Ff [N] | 1080 |
|---|
Notes:
- Position of the oiling Nozzle (dT) for bearings with TA cage/ TXM cage upon request
- The stated load and speed values are given for a spring preloaded single bearing with oil/air or oil mist lubrication. If specific applications differ, please consult correction factors and/or GMN USA engineers.
