Type M Labyrinth Seal

Type M

Type M Labyrinth Seal

The "M" Type labyrinth seals incorporate milled grooves at the outer ring to allow heavy splashing liquid particles to be centrifuged out into an annular groove in the customer's part which is connected to a drain hole. These penetrating liquids can then be led back to the desired location.

  • Diameter range (shaft) d = 15 mm to 210 mm
  • Width - depending on size 10 / 14 / 15 / 20 / 22 mm
  • For fine and coarse granular contamination
  • For heavy splashing liquids
  • No speed limit
  • Maximum temperature 170° C/340° F

 

No. Type Shaft Diameter
d [mm]
Outer Diameter
D [mm]
Width
b [mm]
M 15 x 26 x 8 M 15 26 8
M 18 x 28 x 10 M 18 28 10
M 20 x 28 x 10 M 20 28 10
M 20 x 30 x 10 M 20 30 10
M 22 x 30 x 10 M 22 30 10
M 25 x 37 x 10 M 25 37 10
M 28 x 39 x 10 M 28 39 10
M 30 x 42 x 10 M 30 42 10
M 32 x 45 x 10 M 32 45 10
M 35 x 47 x 10 M 35 47 10
M 40 x 52 x 10 M 40 52 10
M 42 x 55 x 10 M 42 55 10
M 45 x 55 x 10 M 45 55 10
M 45 x 62 x 10 M 45 62 10
M 48 x 62 x 10 M 48 62 10
M 50 x 62 x 10 M 50 62 10
M 52 x 68 x 10 M 52 68 10
M 55 x 68 x 10 M 55 68 10
M 58 x 72 x 10 M 58 72 10
M 60 x 72 x 10 M 60 72 10
M 60 x 80 x 10 M 60 80 10
M 63 x 80 x 10 M 63 80 10
M 65 x 80 x 10 M 65 80 10
M 65 x 85 x 10 M 65 85 10
M 68 x 85 x 10 M 68 85 10
M 70 x 85 x 10 M 70 85 10
M 70 x 90 x 10 M 70 90 10
M 72 x 90 x 10 M 72 90 10
M 75 x 90 x 10 M 75 90 10
M 80 x 100 x 10 M 80 100 10
M 85 x 100 x 10 M 85 100 10
M 90 x 110 x 10 M 90 110 10
M 100 x 120 x 10 M 100 120 10
M 100 x 120 x 14 M 100 120 14
M 110 x 130 x 15 M 110 130 15
M 120 x 140 x 15 M 120 140 15
M 130 x 150 x 15 M 130 150 15
M 140 x 170 x 15 M 140 170 15
M 150 x 180 x 15 M 150 180 15
M 160 x 190 x 20 M 160 190 20
M 170 x 210 x 20 M 170 210 20
M 180 x 210 x 20 M 180 210 20
M 190 x 230 x 20 M 190 230 20
M 200 x 230 x 20 M 200 230 20
M 210 x 250 x 22 M 210 250 22

Click here or call 1.800.323.5725 to Request a quote

Back to Top