VGL F4-D2 Series Roller Ramp Clutch

VGL F4-D2 Series Roller Ramp Clutch

Type Series VGL .. F4-D2 Roller Ramp Clutch

Basic clutch type VGL in combination with flange F4 and cover D2

  • Shaft diameters 12 ­ 80 mm as standards
  • With ball bearing series 16000
  • Assembly and lubrication in accordance to the required idling direction at the customer

Specials

For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).

GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.

Part Number Shaft Diameter
d [mm]
Outer Diameter
D [mm]
Width
b [mm]
Torque
M [Nm]
VGL 12 F2(F4)D2(D3) 12 N/A 42 37
VGL 15 F2(F4)D2(D3) 15 N/A 52 58
VGL 20 F2(F4)D2(D3) 20 N/A 57 140
VGL 25 F2(F4)D2(D3) 25 N/A 60 175
VGL 30 F2(F4)D2(D3) 30 N/A 68 325
VGL 35 F2(F4)D2(D3) 35 N/A 74 400
VGL 40 F2(F4)D2(D3) 40 N/A 86 600
VGL 45 F2(F4)D2(D3) 45 N/A 86 840
VGL 50 F2(F4)D2(D3) 50 N/A 94 1500
VGL 55 F2(F4)D2(D3) 55 N/A 104 1560
VGL 60 F2(F4)D2(D3) 60 N/A 114 2350
VGL 70 F2(F4)D2(D3) 70 N/A 134 3400
VGL 80 F2(F4)D2(D3) 80 N/A 144 4900

Click here or call 1.800.323.5725 to Request a quote

Back to Top