VGL KS-D2 Series Roller Ramp Clutch

VGL KS-D2 Series Roller Ramp Clutch

Type Series VGL .. KS-D2 Roller Ramp Clutch

Basic clutch type VGL in combination with flexible coupling KS and cover D2 to connect two shafts especially when shock loads and some vibrations have to be absorbed.

  • Shaft diameters 15 ­ 60 mm as standards
  • With ball bearing series 16000
  • Please specify idling direction with your order

Specials

For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).

GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.

Part Number Shaft Diameter
d [mm]
Outer Diameter
D [mm]
Width
b [mm]
Torque
M [Nm]
VGL 15.KS 4-D2 15 N/A 52 63
VGL 15.KS 6.3-D2 15 N/A 52 58
VGL 20.KS 6.3-D2 20 N/A 57 63
VGL 20.KS 10-D2 20 N/A 57 100
VGL 25.KS 6.3-D2 25 N/A 60 100
VGL 25.KS 10-D2 25 N/A 60 100
VGL 30.KS 10-D2 30 N/A 68 160
VGL 30.KS 16-D2 30 N/A 68 160
VGL 35.KS 16-D2 35 N/A 74 250
VGL 35.KS 25-D2 35 N/A 74 250
VGL 40.KS 25-D2 40 N/A 86 400
VGL 40.KS 40-D2 40 N/A 86 400
VGL 45.KS 40-D2 45 N/A 86 630
VGL 45.KS 63-D2 45 N/A 86 630
VGL 50.KS 63-D2 50 N/A 94 630
VGL 50.KS 100-D2 50 N/A 94 1000
VGL 55.KS 100-D2 55 N/A 104 1000
VGL 60.KS 100-D2 60 N/A 114 1000
VGL 60.KS 160-D2 60 N/A 114 1600

Click here or call 1.800.323.5725 to Request a quote

Back to Top