VGLP F7-D7 Series Roller Ramp Clutch

Type Series VGLP .. F7-D7 Roller Ramp Clutch

Basic clutch type VGL with keyway at the outer ring in combination with flange F7 and cover D7

Shaft diameters 12 80 mm as standards
With ball bearing series 16000
Assembly and lubrication in accordance to the required idling direction at the customer

Specials

For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).

GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.

Part Number	Shaft Diameter d [mm]	Outer Diameter D [mm]	Width b [mm]	Torque M [Nm]
VGL 12 / VGLP 12 F7D7	12	N/A	42	37
VGL 15 / VGLP 15 F7D7	15	N/A	52	58
VGL 20 / VGLP 20 F7D7	20	N/A	57	140
VGL 25 / VGLP 25 F7D7	25	N/A	60	175
VGL 30 / VGLP 30 F7D7	30	N/A	68	325
VGL 35 / VGLP 35 F7D7	35	N/A	74	400
VGL 40 / VGLP 40 F7D7	40	N/A	86	600
VGL 45 / VGLP 45 F7D7	45	N/A	86	840
VGL 50 / VGLP 50 F7D7	50	N/A	94	1500
VGL 55 / VGLP 55 F7D7	55	N/A	104	1560
VGL 60 / VGLP 60 F7D7	60	N/A	114	2350
VGL 70 / VGLP 70 F7D7	70	N/A	134	3400
VGL 80 / VGLP 80 F7D7	80	N/A	144	4900