VGV Series Roller Ramp Clutch
Type Series VGV Roller Ramp Clutch
This series can be used for indexing and backstopping devices by means of the momentum lever or torque arm.
- Shaft diameters 20 - 80 mm as standards
- With sleeve bushings
- Grease packed for lifetime
Specials
For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).
GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.
| Part Number | Shaft Diameter d [mm] |
Outer Diameter D [mm] |
Width b [mm] |
Torque M [Nm] |
| VGV 20 | 20 | 83 | 35 | 440 |
| VGV 25 | 25 | 83 | 35 | 440 |
| VGV 30 | 30 | 118 | 54 | 2050 |
| VGV 35 | 35 | 118 | 54 | 2050 |
| VGV 40 | 40 | 118 | 54 | 2050 |
| VGV 45 | 45 | 155 | 54 | 3200 |
| VGV 50 | 50 | 155 | 54 | 3200 |
| VGV 55 | 55 | 155 | 54 | 3200 |
| VGV 60 | 60 | 155 | 54 | 3200 |
| VGV 70 | 70 | 155 | 54 | 3200 |
| VGV 80 | 80 | 190 | 64 | 5000 |