Seal CF 6020 S10
| Part Number | CF 6020 S10 |
|---|
| Series | CF 60 |
|---|
| Drain Grooves | No |
|---|
Material
| Inner Ring Material | Steel |
|---|
| Outer Ring Material | Steel |
|---|
Shaft & Housing Tolerances
| ID Tolerance | -0µ to +16µ
|
|---|
| OD Tolerance | -18µ to +0µ
|
|---|
| Shaft & Housing Surface | Rz ≤ 16µm ; Ra ≤ 3.2µm |
|---|
Dimensions
| Bore Diameter | ID [mm] | 100 |
|---|
| Outer Diameter | OD [mm] | 150 |
|---|
| Width | W [mm] | 6 |
|---|
| Minor Gap Diameter | e1 [mm] | 117 |
|---|
| Major Gap Diameter | e2 [mm] | 127 |
|---|
| Axial Clearance1 | Sax [mm] | 1 |
|---|
Misc. Data
| Weight | [kg] | 0.465 |
|---|
| Max Speed2 | [rpm] | N/A |
|---|
| Temperature Range | [°C] | -40 – 170 |
|---|
Notes:
- Other materials available on request.
- Axial Clearance (Sax) = The total axial movement of the seal’s inner ring in relation to the outer ring in the axial direction.
- The stated speed value is contingent on utilizing specified tolerances, correct installation techniques, and an operating temperature below the specified maximum. CF60/619 Seals are installed between the spindle bearing and the shaft nut. This prevents any axial mobility and removes the need for a speed limit.
- Installation example with preload transferred through seal.
- Installation example with gap between seal and bearing.
- Mounting aid suggested to ensure proper axial alignment after installation.
- CF 60/619 Seals are designed to utilize the recommended bearing shaft and housing tolerances.
* Contact GMN USA engineers for any technical assistance.
