Seal CF 61914 S10 | GMN Bearing USA

Seal CF 61914 S10

Download PDF File Download 3-D FileFor Internet Explorer, right-click and choose 'Save Target As...' to download the 3-D files.
CF 61914 S10
Part NumberCF 61914 S10
SeriesCF 619
Drain GroovesNo


Inner Ring MaterialSteel
Outer Ring MaterialSteel

Shaft & Housing Tolerances

ID Tolerance-0µ to +14µ
OD Tolerance-16µ to +0µ
Shaft & Housing SurfaceRz ≤ 16µm ; Ra ≤ 3.2µm


Bore DiameterID [mm]70
Outer DiameterOD [mm]100
WidthW [mm]6
Minor Gap Diametere1 [mm]80
Major Gap Diametere2 [mm]90
Axial Clearance1Sax [mm]1

Misc. Data

Weight [kg]0.19
Max Speed2 [rpm]N/A
Temperature Range [°C]-40 – 170


  1. Other materials available on request.
  2. Axial Clearance (Sax) = The total axial movement of the seal’s inner ring in relation to the outer ring in the axial direction.
  3. The stated speed value is contingent on utilizing specified tolerances, correct installation techniques, and an operating temperature below the specified maximum. CF60/619 Seals are installed between the spindle bearing and the shaft nut. This prevents any axial mobility and removes the need for a speed limit.
  4. Installation example with preload transferred through seal.
  5. Installation example with gap between seal and bearing.
  6. Mounting aid suggested to ensure proper axial alignment after installation.
  7. CF 60/619 Seals are designed to utilize the recommended bearing shaft and housing tolerances.

* Contact GMN USA engineers for any technical assistance.

Click here or call 1.800.323.5725 to Request a quote

Back to Top