Seal L 180 x 210 x 20
| Part Number | L 180 x 210 x 20 |
|---|
| Series | L |
|---|
| Drain Grooves | No |
|---|
Material
| Inner Ring Material | Steel |
|---|
| Outer Ring Material | Aluminum |
|---|
Shaft & Housing Tolerances
| Shaft Tolerance | h6 |
|---|
| Housing Tolerance | K7 |
|---|
| Shaft & Housing Surface | Rz ≤ 16µm ; Ra ≤ 3.2µm |
|---|
| Shaft & Housing Chamfer | 2mm × 15° |
|---|
Dimensions
| Bore Diameter | ID [mm] | 180 |
|---|
| Outer Diameter | OD [mm] | 210 |
|---|
| Width | W [mm] | 20 |
|---|
| Gap Diameter | e [mm] | 204.5 |
|---|
| Axial Clearance1 | Sax [mm] | 0.8 |
|---|
| Drain Groove Width | c [mm] | N/A |
|---|
Misc. Data
| Weight | [kg] | 1.07 |
|---|
| Max Speed2 | [rpm] | 5,300 |
|---|
| Temperature Range | [°C] | -40 – 200 |
|---|
Notes:
- Axial Clearance (Sax) = The total axial movement of the seals inner ring in relation to the outer ring in the axial direction.
- The stated speed value is contingent on utilizing specified tolerances, correct installation techniques, and an operating temperature below the specified maximum.
