Seal L 48 x 62 x 10
Part Number | L 48 x 62 x 10 |
Series | L |
Drain Grooves | No |
Material
Inner Ring Material | Steel |
Outer Ring Material | Aluminum |
Shaft & Housing Tolerances
Shaft Tolerance | h6 |
---|
Housing Tolerance | K7 |
---|
Shaft & Housing Surface | Rz ≤ 16µm ; Ra ≤ 3.2µm |
---|
Shaft & Housing Chamfer | 1mm × 15° |
Dimensions
Bore Diameter | ID [mm] | 48 |
Outer Diameter | OD [mm] | 62 |
Width | W [mm] | 10 |
Gap Diameter | e [mm] | 59 |
Axial Clearance1 | Sax [mm] | 0.4 |
Drain Groove Width | c [mm] | N/A |
Misc. Data
Weight | [kg] | 0.06 |
Max Speed2 | [rpm] | 24,500 |
Temperature Range | [°C] | -40 – 200 |
Notes:
- Axial Clearance (Sax) = The total axial movement of the seals inner ring in relation to the outer ring in the axial direction.
- The stated speed value is contingent on utilizing specified tolerances, correct installation techniques, and an operating temperature below the specified maximum.