Seal M 110 x 130 x 15
Part Number | M 110 x 130 x 15 |
Series | M |
Drain Grooves | Yes |
Material
Inner Ring Material | Steel |
Outer Ring Material | Aluminum |
Shaft & Housing Tolerances
Shaft Tolerance | h6 |
---|
Housing Tolerance | K7 |
---|
Shaft & Housing Surface | Rz ≤ 16µm ; Ra ≤ 3.2µm |
---|
Shaft & Housing Chamfer | 1.5mm × 15° |
Dimensions
Bore Diameter | ID [mm] | 110 |
Outer Diameter | OD [mm] | 130 |
Width | W [mm] | 15 |
Gap Diameter | e [mm] | 125 |
Axial Clearance1 | Sax [mm] | 0.7 |
Drain Groove Width | c [mm] | 5 |
Misc. Data
Weight | [kg] | 0.29 |
Max Speed2 | [rpm] | 11,700 |
Temperature Range | [°C] | -40 – 200 |
Notes:
- Axial Clearance (Sax) = The total axial movement of the seals inner ring in relation to the outer ring in the axial direction.
- The stated speed value is contingent on utilizing specified tolerances, correct installation techniques, and an operating temperature below the specified maximum.