Series BHT

Series BHTThe GMN BHT series bearings are separable bearings for complicated installs or applications that require a great amount of axial movement. Specific BNT characteristics are

  • Inner geometry modeled after the SM series bearings – performance characteristics will be similar
  • Ball retaining cage – balls stay in the cage when the bearing is apart
  • Outer race guided cage
  • Simple Assembly – inner and outer races are installed separately
  • Rotating assembly can be balanced with the inner race installed
  • Specified axial clearances can be achieved
  • Hybrid (Silicon Nitride balls) available upon request

BHT Series Product Numbers

No. Basic type Inner
diameter
d [mm]
Outer
diameter
D [mm]
Width
b [mm]
Speed
value Oil
Load
Rating
Dynamic
Load
Rating
Static
196 BHT 607 C TAM ABEC7 UL 7 19 6 135000 1800 700
188 BHT 608 C TAM ABEC7 UL 8 22 7 120000 2500 950
156 BHT 608 X - 2Z ABEC7 UL 8 22 10.31 80000 3500 1500
180 BHT 609 C TAM ABEC7 UL 9 24 7 110000 2800 1100
174 BHT 6000 C TAM ABEC7 UL 10 26 8 100000 3750 1550
127 BHT 6000 X - 2Z ABEC7 UL 10 26 11.51 60000 5600 2600
165 BHT 6001 C TAM ABEC7 UL 12 28 8 90000 4100 1750
116 BHT 6001 X - 2Z ABEC7 UL 12 28 11.51 54000 6000 2900
150 BHT 6002 C TAM ABEC7 UL 15 32 9 77000 4700 2150
101 BHT 6002 X - 2Z ABEC7 UL 15 32 11.51 46000 6800 3500
142 BHT 6003 C TAM ABEC7 UL 17 35 10 69000 4950 2350
89 BHT 6003 X - 2Z ABEC7 UL 17 35 12.7 41000 7000 3800
90 BHT 6004 X - 2Z ABEC7 UL 17 35 15.88 41000 12400 6900
124 BHT 6004 C TAM ABEC7 UL 20 42 12 58000 7950 3800
109 BHT 6005 C TAM ABEC7 UL 25 47 12 50000 8850 4500
93 BHT 6006 C TAM ABEC7 UL 30 55 13 42000 11600 6250

Speed values shown are for oil-lubrication, with the exception of series BHT ... X-2Z with grease lubrication.
If the operating conditions deviate correction factors must be taken into account.


Click here or call 1.800.323.5725 to Request a quote

Back to Top