VGF Series Roller Ramp Clutch
Type Series VGF Roller Ramp Clutch
To be used inside housings, these Clutches are supported.
- Shaft diameters 8 - 60 mm as standards
- Sizes 8 .. 20 with sleeve bushings
- Sizes 25 .. 60 with ball bearings
- Rust protected only
For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).
GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.
|Part Number||Shaft Diameter