VSNU Series Roller Ramp Clutch

VSNU Series Roller Ramp Clutch

Type Series VSNU Roller Ramp Clutch

  • Connecting dimensions like ball bearings series 6300
  • Shaft diameters 8 - 80 mm as standards
  • Rust protected only

Specials

For high indexing accuracy GMN roller ramp clutches could be delivered with increased spring load on request. This modification could be provided with all GMN roller ramp clutches, please add the index "V" (i.e. VSNU .. V).

GMN would be pleased to consider any application where modification of our existing line of clutches can be accomplished to fit a specific need. Often we must request drawings of mating parts. Please make sure, that we get any information which might be of importance.

Part Number Shaft Diameter
d [mm]
Outer Diameter
D [mm]
Width
b [mm]
Torque
M [Nm]
VSNU 8 8 35 13 8.5
VSNU 12 12 35 13 8.5
VSNU 15 15 42 18 29
VSNU 17 17 47 19 45
VSNU 20 20 52 21 72
VSNU 25 25 62 24 100
VSNU 30 30 72 27 165
VSNU 35 35 80 31 245
VSNU 40 40 90 33 345
VSNU 45 45 100 36 545
VSNU 50 50 110 40 730
VSNU 60 60 130 46 960
VSNU 70 70 150 51 1600
VSNU 80 80 170 58 2400

Click here or call 1.800.323.5725 to Request a quote

Back to Top